The T1 Terminal's Gate 115 passenger corridor at Guangzhou Baiyun International Airport has adopted Signscal's thermal insulation one-way vision film (G7109). The film's insulation principle is based on ultraviolet blocking and heat dissipation, delivering higher efficiency than standard one-way films. In summer, it effectively blocks outdoor heat radiation and UV rays to keep interiors cooler; in winter, it reduces indoor heat loss to maintain warmth. With its simple interior adhesive installation, the film leaves no residue and provides a convenient application experience. Once in place, it significantly improved passenger comfort, with a noticeable drop in perceived temperature.

On the afternoon of June 14, the award ceremony of the 7th Zhuhai “Mayor’s Cup” Industrial Design Competition was held at Beijing Normal University Zhuhai Campus. After rigorous evaluation by a panel of experts, a total of 68 winning entries and 37 outstanding student works were honored. Signscal's entry, Inkjet-Printable Water-Based Foamed Pressure-Sensitive Adhesive, received high acclaim from the jury and proudly claimed the only first prize in the fine chemicals category.



 

From March 28 to 30, 2024, the 2024 Macau International Environmental Cooperation Forum & Exhibition (2024 MIECF), hosted by the Government of the Macao Special Administrative Region, was grandly held at The Venetian Macao. With the theme “Promoting Green Transformation and Practicing the Dual-Carbon Goals”, the event attracted over 400 enterprises from more than 30 countries and regions, all gathering to contribute ideas for global environmental development. As a highly influential company in the industry, Signscal made a brilliant appearance, showcasing its cutting-edge environmental technology and demonstrating exceptional capabilities at this environmental extravaganza.
This year's MIECF was unprecedented in scale, covering 12,000 square meters, a 20% increase over last year. The exhibition featured five major zones: the Pan-Pearl River Delta Regional Pavilion, the Greater Bay Area Environmental Industry Pavilion, the Green Low-Carbon Project Pavilion, the Green Smart Industry Pavilion, and the Green Transportation Pavilion. Together, these zones comprehensively showcased environmental products and services in areas such as carbon neutrality technologies, energy management, water resource management, green transportation, eco-city integration, and green building solutions.
Signscal attracted widespread attention with its unique design and rich exhibition content. During on-site demonstrations, the company presented its thermal insulation one-way vision film, which effectively blocks outdoor heat radiation in summer to keep interiors cool, and reduces indoor heat loss in winter to maintain warmth. Its excellent performance and ease of use drew numerous professional visitors and potential clients, who stopped to engage in in-depth discussions with Signscal’s team, learning about product details, application scenarios, and potential collaboration opportunities.
As the 2024 MIECF successfully concluded, the achievements and attention Signscal garnered at the exhibition will serve as a strong driving force for its continued growth and innovation in the environmental technology sector.

Recently, the 25th China International High-Tech Fair (CHTF) was grandly held in Shenzhen, bringing together over 4,000 enterprises from 105 countries and regions around the world to celebrate a technological extravaganza. As a highly regarded company in the industry, Signscal made a remarkable appearance with its cutting-edge technological achievements, showcasing its unique charm at this prestigious event.
This year's CHTF, themed “Stimulating Innovation and Enhancing Development Quality”, covered a total exhibition area of 500,000 square meters, marking an unprecedented scale. Signscal was featured in the Zhuhai delegation's exhibition area, attracting considerable attention from attendees. The company presented a series of innovative products and technologies that highlighted its deep expertise and outstanding innovation in revolutionary bionic nano-adhesive technology.
At this fair, Signscal focused on its nano-adhesive products, which drew widespread attention due to their exceptional performance, including advanced physical adhesion, high temperature resistance, printable adhesive surfaces, and residue-free reusability. These products leverage Signscal's independently developed nano-adhesive technology, effectively addressing long-standing industry challenges and offering innovative solutions across advertising, signage, packaging, construction, industrial, and consumer sectors. During live demonstrations, the high efficiency and ease of use of the nano-adhesive products attracted numerous professionals and potential clients, who engaged in in-depth discussions about product details and applications. The display also garnered interest from research institutions and industry experts, who praised Signscal's forward-looking approach to technological innovation.
Throughout the exhibition, Signscal's booth was extremely popular, receiving a large number of professional visitors from both domestic and international markets, as well as extensive media coverage. Through these exchanges and collaborations, Signscal is expected to further expand its market presence, accelerate the application and commercialization of its technological achievements, and contribute more to global technological development.
The company stated that it will seize this opportunity to continue increasing R&D investment, pursue continuous innovation, and launch more competitive products and technologies to help the industry reach new heights.

In August 2019, Signscal's innovative double-sided printable one-way vision material (G7108) was chosen by global leader LinkedIn for the glass window decoration project of its Beijing headquarters café. The project was carried out in collaboration with renowned design and engineering firms Gemsler and M. Moser Associates, and is located at the premium six-star commercial complex, Kerry Center in Beijing's Chaoyang District.

LinkedIn required a solution that would balance privacy and natural lighting in its office space. Designers utilized the double-sided printable, interior-applied film to effectively convey LinkedIn's brand image while meeting functional needs. The material's excellent heat insulation and UV-blocking properties help reduce energy consumption, while the interior adhesive application aligns with property management requirements, eliminating the need for outdoor high-rise installation. The film is simple to apply, time-saving, and labor-efficient.

The use of Signscal's water-based, residue-free one-way vision film revolutionizes and outperforms traditional market options—typically films with oil-based adhesives, exterior applications, single-sided printability, and no insulation function.
   
Conventional adhesive films before decoration can only be applied externally                   

   
After decoration, residue-free adhesive films allow interior application while maintaining privacy from the outside


Daytime Exterior View                                                                     Daytime Interior View


Clear Interior-to-Exterior View in Daytime                               Clear Image Visibility from Interior at Night
 

In June 2019, Signscal became the preferred material supplier and service provider for advertising displays on China Post Group's smart parcel lockers and “BeeBox” lockers.
With the rapid development of the logistics and express delivery industry, smart parcel lockers have been widely deployed across residential communities, commercial buildings, and public institutions, becoming a new medium for advertising that is increasingly favored by clients. Signscal's adhesive printing materials adopt its innovative “residue-free adhesive” technology, based on a micro-suction principle, which revolutionizes the traditional oil-based adhesive method. This breakthrough solves long-standing issues in locker advertising installations, such as the need for water spraying to remove bubbles, the difficulty of precise alignment due to strong adhesion, and the residual glue left after prolonged outdoor exposure to sunlight and heat.
By using Signscal's residue-free or eco-friendly water-based adhesive materials (models G7220, S1000, S1000E), installation is simple and direct, requiring no water spraying. Bubbles are easily released or absorbed, reducing both installation and removal time as well as labor costs. The film leaves no adhesive residue, protecting locker surfaces, while the water-based adhesive contains no volatile organic compounds, making it environmentally friendly.

In June 2019, Signscal's residue-free PVC printing film (G7220) was used as booth decoration material at the Energy Conservation and Environmental Protection Exhibition held at the Guangdong Provincial Sun Yat-sen Library. The residue-free adhesive film, with its low-tack formula for easy alignment, bubble-free application without water spraying, and residue-free removal that leaves no damage to surfaces, outperformed conventional PVC advertising films available on the market. Moreover, it reduced installation time by more than 40%, saving both labor and cost. Signscal's innovative, eco-friendly, and energy-saving adhesive film not only supported the exhibition setup but also became a featured product at the event. 

On May 14, 2019, Signscal took part in the 2019 FESPA Global Print Expo held in Munich, Germany. During the exhibition, purchasing representatives from numerous advertising companies around the world showed strong interest in Signscal's products and expressed a keen desire for future cooperation.

In May 2019, Signscal, as the material supplier, provided high-quality advertising printing films for the “Friends of the Library” Volunteer Showcase Event at the Guangdong Provincial Sun Yat-sen Library. The outstanding display effects attracted wide public attention and recognition.

During the Shanghai Advertising Exhibition in March 2018, the management team of Signscal met with the visiting general manager and executives of U.S.-based DAF Company. Both parties held in-depth discussions on promoting the development of innovative and eco-friendly products, leveraging the launch of Signscal's new Zhuhai factory, and further expanding cooperation in the U.S. market.

From March 13 to 15, 2019, Mr. Katsuhiko Kuwata, Technical Director of Signscal, visited the Zhuhai factory to provide on-site technical guidance. His expertise contributed to the production technology and product quality of Signscal's residue-free adhesive line, with particular focus on ensuring the smooth adaptation and optimization of the adhesive coating process on the newly launched production line.

From March 7 to 10, 2019, Mr. Takayoshi Shimizu, Chief Advisor of Signscal, accompanied by colleague Mr. Mizuno and interpreter Ms. Yang Xia, once again visited the company's Zhuhai factory for an on-site inspection.

During the visit, Mr. Shimizu engaged in in-depth discussions with Signscal's management on the application of residue-free adhesive technology in today's global markets, as well as long-term sales strategies in Japan. He emphasized that this innovative adhesive, with its unique micro-suction mechanism and eco-friendly properties, will become a “leader in future adhesive technologies.” He noted that it aligns perfectly with global development trends and China’s sustainability goals, holding vast market potential. He also explored with the management the possibilities of developing new products and future cooperation models.
After dozens of hours of intensive discussions, Mr. Shimizu and Signscal reached a shared vision on product sales strategy. He committed to supporting the promotion and expansion of Signscal's products in the Japanese market.
 

On November 10, 2018, Mr. Tomoyuki Fujimoto and Mr. Hideaki Hirai, representatives of Sanyo Trading Co., Ltd. (Japan), visited Signscal's Zhuhai factory for an on-site inspection. During the visit, both sides held in-depth discussions on integrating advanced materials with Signscal's residue-free adhesive technology to develop high-end adhesive coating products. The two parties reached a consensus on promoting these innovative solutions to international premium markets and established a cooperative partnership.

From June 15 to 17, 2018, Mr. Takayoshi Shimizu, Product Development Advisor of Signscal, visited the company's new Zhuhai factory, which had completed basic construction and entered the trial production phase. Mr. Zhihuan Zhu, General Manager of Signscal, accompanied Mr. Shimizu to inspect the operation of the factory's automated coating equipment and supporting facilities.